The XT1 is a hybrid of sport and street, with features from both. We’d place it in the somewhat nebulous “supersport” category, such as the CMS GTRS we reviewed recently.
Unfortunately for the XT1, it arrived at the same time as the CMS GTRS and back-to-back evaluation rides pointed to at least one major difference. The XT1 is much louder than the GTRS when riding in the exact same conditions on the same motorcycles.
We’ll discuss that in the “Sound Levels” section below.
The XT1 comes in either the tri-composite matrix shell form or a pure carbon fiber shell. The “Titanium Graphite” version shown here is the former and Nexx refers to the solid color XT1 helmets as the “Plain” model.
While there’s little imagination in that appellation, the Titanium Graphite is a pretty cool “stealthy” look design. The surface is matte and it has that sort of rubbery-feeling finish similar to “Rubatone”. This one is much easier to clean and doesn’t attract fingerprints, however.
The overall quality and the paint or finish is excellent, with no flaws. The entire helmet looks and feels modern, without a trace of the offbeat and somewhat crude features of the original XR1R (e.g., the XR1R’s face shield rotating system).
In other words, the XT1 is modern in every way.
The moving parts all have a solid feel and the face shield has a new release system with firm detents and a tight seal against the eye port gasket.
The liner and padding is also nice and thick and comfortable and the overall fit and finish of the liner and fabric is right up there with the best.
Score: We’ll rate the XT1 as “Outstanding” for overall quality. See the Summary Table at the bottom of the page for a description of our rating system.
This XT1 is a size large and it fits as expected for a 59-60 cm head. The internal shape is what we’d call a “Medium Narrow” to “Slight Narrow”, very similar to a modern Shoei GT-Air (review) or theArai Signet-Q Pro Tour (review), but maybe a touch tighter on the sides.
This will be good news for the many webBikeWorld readers who have written us over the last year, bemoaning the trend of helmet manufacturers to make helmets with a “Neutral” internal shape.
The thick padding in the XT1 means there are no hotspots or sharp points to be felt. The narrower shape means riders with rounder heads may have problems fitting eyeglasses.
The ear pockets aren’t as deep as some and they are nicely lined at the bottom. Underneath the lining is a molded area in the EPS for the optional Nexx X-Com intercom speakers.
So the shallower pockets may be a benefit, as they keep the speakers closer to the ears — important for good sound volume and quality.
The chin bar is molded on the inside to fit the microphone of the X-Com intercom kit.
The liner is fully removable, as are the cheek pads. The cheek pads have emergency release straps, which can be pulled to quickly remove the padding.
The XT1 has 3 shell sizes to span the head size range: XXS-S; M-L and XL-XXL, so that’s a plus. Note that the stylized gasket/spoiler around the bottom and the X-Com mounting port pretty much preclude mounting of other types of clip-on intercom systems.
Score: We rate the XT1 as “Outstanding” for shape, comfort and padding and the nicely designed speaker pockets.
Face Shield, Eye Port and Outward Visibility
One of the unique features of the XT1 is the face shield, which is extra tall and covers part of the helmet above the eye port. The eye port gasket has been extended also, so the black portion matches the shape along the top part of the face shield.
The face shield seals tight against the oversize gasket and the removal mechanism is spring-loaded, which helps to pull the face shield tight to maintain that waterproof seal.
The face shield has a single tab at the center. Under the tab is a push button that acts as the face shield lock. Push the button to release the face shield into a very slight city defogging position — it’s just a crack, but it helps.
The 2.44 mm thick face shield can then be raised through 3 stiff detents. The final detent is extra-strong to hold the face shield open in the fully raised position.
The face shield has Pinlock posts but no Pinlock insert is included. There is some distortion at either side of the face shield, caused by a slight indent in the molding to fit the Pinlock and the distortion is somewhat annoying when doing over-the-shoulder traffic checks.
The vertical sight lines are excellent and the horizontal visibility would be also, but the distortion limits this a bit at the extremes.
Internal Sun Visor
The XT1 has an internal sun visor, which slips into a cavity above the forehead, eliminating the possibility of Snell certification.
The sun visor works very well; it’s a friction-based system, with a slider up and to the rear, on the left side of the exhaust vent assembly. It’s fairly easy to find when wearing gloves and the sun visor can be stopped in an intermediate position.
The coverage provided by the sun visor is excellent; it’s among the best when it comes to coverage without annoying cutouts or curves. So overall, we rate the XT1’s sun visor as outstanding.
Score: The visibility and face shield operation and the internal sun visor of the XT1 rate an “Excellent”.
Nexx XT1 Vents and Ventilation
The top vent assembly in the XT1 is operated by a small but prominent rocker/slider switch on the top. It opens and closes both vents simultaneously, which eliminates fussing with separate vents.
The vent openings are narrower than average and unfortunately the plastic that blocks the vent doesn’t fold back and up out of the way, so this limits the amount of air intake.
Nevertheless, the liner is properly designed with open panels or slots along the top of the head. This allows the air to flow in through four large holes through the EPS and on to the rider’s head.
The chin vent has a vertical slider, which flows air up along the top of the chin bar only. There are no vents through the chin bar itself, due to the molding for the X-Com microphone. The air flow through the chin vent is average.
There are two “always open” exhaust vents in the rear of the helmet. Overall, the system works well, with ventilation at average to slightly above average levels.
Score: We rate the overall ventilation as “Very Good”.
The internal sun visor slider conveniently located on the rear exhaust assembly.
Chin vent and push-button face shield release/lock.
Nexx XT1 Sound Levels
Unfortunately for the XT1, it had the unfortunate circumstance of being evaluated on the road concurrently with the CMS GTRS helmet we reviewed recently.
The XT1 just seemed a bit cruder overall, with the big difference being the amount of noise that comes through the XT1. It is immediately noticeable in comparison; something about the XT1 overall design seems to allow more ambient engine and mechanical noises through.
When riding, the XT1 is louder than the GTRS. The noise comes mostly through the rear of the helmet, where the cheek pads meet the liner. We have noticed this issue before in several other helmets.
There needs to be a better fit or different design where the cheek pads meet the rear of the padding in the helmet liner, which would help attenuate the noise.
When a hand is placed over this area, the noise decreases dramatically, so thicker padding or a different design would help.
Otherwise, the noise at the upper part of the XT1 is average, helped by the low-profile intake.
Note that our helmet evaluations are a combined effort of several riders over time on different types of motorcycles with and without windscreens.
Evaluators wear correctly fitted, high quality ear plugs (even when evaluating motorcycle intercom systems).
Always protect your hearing when riding a motorcycle. See the wBW Earplug Reviews for more information on choosing and wearing earplugs.
Note also that perceived noise levels will vary, depending on the individual.
Noise can be caused by many factors, including helmet fit, the type of motorcycle and windscreen, wind speed and direction and even the rider’s clothing.
The XT1 has thick cushions on the chin strap and a “quick release” chin strap retainer. Nexx has recently revised their U.S. distribution system and headquarters and Nexx helmets are once again available in the U.S.A.
wBW Opinionator: Nexx XT1 Helmet
Outstanding overall quality.
Excellent internal sun visor.
Good sight lines from the eye port.
Three shell sizes.
Louder than we expected.
Lower ventilation could be improved.
The Nexx XT1 is another very nicely made helmet from the “new” Nexx, with overall excellent quality.
It would make an excellent street, sport or touring helmet for anyone wanting to move up from a basic full-face without spending a fortune.
However, the overall feeling is that the price may be a bit of a reach; perhaps a $350.00 list would be better…although you are getting the higher-end composite shell construction and the accommodations for the X-Com intercom system and the 3 shell sizes.
Perhaps if the Pinlock was standard equipment? Or if the helmet was a class-leader in terms of noise control?
One thing is certain: the XT1 is a big improvement over earlier Nexx full-face helmets and the fact that we can nitpick advanced features is actually a good thing!
From “R.C.” (October 2015): “Basically with my long oval head shape this helmet envelops my head rather than just sits on it like some other helmets.
I found that the visibility is excellent and the internal sunshade is much better than others I’ve tried on helmets such as Scorpion.
Every opening lets lots of air in but when the face shield is closed I still hear a little wind noise but with certain head turns it feel solid and much sturdier than several of my other helmets.
I’ve tried riding it up to speeds of 80 miles an hour and it definitely instills confidence — stupidly I’m sure but still confidence 🙂
It feels like it is cutting the air in a superior way, the weight is light and balanced. The only thing I don’t like is the securing buckle as it pushes my Adam’s apple, however less than others with similar clasps and this one does move forward and stay.
Super satisfied with the matte color and helmet is my daily rider now!”
From “B” (July 2015): “Great helmet. Good looking, great function with wonderful execution. Another helmet that I will not even try to fit on my ROUND head.”